|
|||||||
New trick to fix buzzing string |
Share Thread
|
Subject: New 10 sec. trick to fix buzzing string From: Donuel Date: 10 Dec 18 - 05:49 PM The ultra violet light activated resins (glue) you can buy were first used in dentistry and then glasses repair but now I found it can fix a string too close to frets in ten seconds. Just a tiny bit of the resin spread on the lower bridge where the string rests and then cured with included uv light did the trick for me. It is invisible but looks green under UV light. |
Subject: RE: New trick to fix buzzing string From: punkfolkrocker Date: 11 Dec 18 - 12:46 AM If you already have superglue and baking soda [or even bone dust...???] in the house, would this be as strong as, or even stronger a fix...??? Do I really need an excuse to buy and try an ultra violet glue kit just for the fun of it, in the xmas sales...????? |
Subject: RE: New trick to fix buzzing string From: Will Fly Date: 12 Dec 18 - 03:49 AM That's an interesting trick, Donuel - I assume you're talking about the saddle here. Given that buzzing can be caused by several things - wear on the saddle, wear at the nut, an unseated or worn fret, neck arching, etc. - I think I'd prefer a more manual and traditional solution. But if it was an emergency solution, in a pre-concert situation, say, then good luck to it. |
Subject: RE: New trick to fix buzzing string From: Stanron Date: 12 Dec 18 - 04:15 AM It's a good trick for the nut, as is the bone dust and super glue. For the saddle, I would just cut a new one. |
Subject: RE: New trick to fix buzzing string From: GUEST,Ray Date: 12 Dec 18 - 09:38 AM And what’s wrong with a bit of fag packet? That’s always been the “traditional” approach. |
Subject: RE: New trick to fix buzzing string From: Donuel Date: 12 Dec 18 - 04:21 PM I experimented and found I could multiply the strength of light activated resin by mixing a bit of moisture activated superglue. Its about ten fold better in attachment and permanency. My cousin was first to market super glue 60 years ago in Boston so I am more than acquainted with adhesives. But with enough area of attachment resin is all you need raise soft acoustic strings that travel widely in the middle. The saddle/ bridge allows smaller adjustments than the nut imo. Stanron I couldn't find a new part |
Subject: RE: New trick to fix buzzing string From: punkfolkrocker Date: 12 Dec 18 - 05:15 PM Next... how to remove dried superglue off the gloss poly finish of a Fender guitar...????? grrr.. fat lot of use masking tape was... |
Share Thread: |
Subject: | Help |
From: | |
Preview Automatic Linebreaks Make a link ("blue clicky") |