 sj |
||
|
||
Tech: Anybody having trouble? (error 37000)
|
|
|
Subject: Tech: Anybody having trouble posting? From: Joe Offer Date: 23 Jan 10 - 04:16 PM A couple of people told me they had trouble posting messages in the Forum this morning. Is this widespread? Has it resolved itself this afternoon? -Joe- |
|
Subject: RE: Tech: Anybody having trouble posting? From: MartinRyan Date: 23 Jan 10 - 04:18 PM Yeah, Joe - I had a few Teflon, non-stick messages this morning. Haven't noticed in the past few hours. Regards |
|
Subject: RE: Tech: Anybody having trouble posting? From: olddude Date: 23 Jan 10 - 04:19 PM me too |
|
Subject: RE: Tech: Anybody having trouble posting? From: Q (Frank Staplin) Date: 23 Jan 10 - 04:30 PM Occasional problems with messages that won't post, but not serious. If I come back later, they usually stick. |
|
Subject: RE: Tech: Anybody having trouble posting? From: Gurney Date: 23 Jan 10 - 04:35 PM Like Q, but I'm trans-Pacific. They seem to go, but don't appear on the thread. |
|
Subject: RE: Tech: Anybody having trouble posting? From: Stilly River Sage Date: 23 Jan 10 - 04:36 PM I haven't been here much today, but for the last couple of weeks I've several times had to use the "back" button to rescue a post that didn't take and return to Mudcat in a new browser to paste it in. SRS |
|
Subject: RE: Tech: Anybody having trouble posting? From: GUEST,999 Date: 23 Jan 10 - 04:37 PM Not today--but I wasn't on this AM. Few weeks back I had the same problem as SRS. For a few days. |
|
Subject: RE: Tech: Anybody having trouble posting? From: Joe Offer Date: 23 Jan 10 - 04:42 PM This is probably a good day to remember to copy your messages before you post, just in case.
-Joe- |
|
Subject: RE: Tech: Anybody having trouble posting? From: Jeri Date: 23 Jan 10 - 04:43 PM Joe, Mudcat was screwed up. It was staggering around and then fell over completely. I texted Max and he gave it some coffee and an egg sandwich and it's all better now. |
|
Subject: RE: Tech: Anybody having trouble posting? From: Joe Offer Date: 23 Jan 10 - 04:45 PM That's what I figured, Jeri - but still it's a good idea to copy long messages before posting - just in case. -Joe- |
|
Subject: RE: Tech: Anybody having trouble posting? From: beeliner Date: 23 Jan 10 - 04:50 PM I've had trouble scrolling on long threads - just in the past few days. After scrolling down part way it freezes and you have to wait. |
|
Subject: RE: Tech: Anybody having trouble posting? From: Joybell Date: 23 Jan 10 - 04:53 PM I had trouble starting a thread a week back. I always save long posts so I started over with a new title. Then it worked OK. Cheers, Joy |
|
Subject: RE: Tech: Anybody having trouble posting? From: JohnInKansas Date: 23 Jan 10 - 05:14 PM Haven't posted anything today, but yesterday when I hit Submit I got a "query error" and when I tried to refresh the page (to make sure the post hadn't made it so that I wouldn't double post) I got a "Page Not Found" and was unable to open anything at mudcat for about an hour. Two or three days back I got one "shut down by operator" for an hour or two, and in the last two or three weeks I've hit at least a three or four "site not found" bounces, each lasting an hour more. In the past, most failures could be reposted immediately; but all of my recent ones have found the site unavailable for some time. I've had to come back later to complete the post. My most common relay servers are in areas where there's been some pretty horrible weather recently, with both phone and power outages reported, so that might have been a factor(?). I haven't bothered to look at whether any relays have been down though. John |
|
Subject: RE: Tech: Anybody having trouble posting? From: katlaughing Date: 23 Jan 10 - 06:51 PM This morning I couldn't get anything to post and when I checked "Messages since last visit" it appeared no one had for a while. I got an error page, every time which said: Something about emailing the admin at mud-error@mudcat.org (which I did and it came back as undeliverable) Error Occurred While Processing Request Error Diagnostic Information ODBC Error Code = 37000 (Syntax error or access violation) [Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate space for object 'ThreadMessages' in database 'Mudcat2007' because the 'PRIMARY' filegroup is full. SQL = "Exec ThreadMessageNew2 126718, 2993, '', 'RE: Nick Drake - hype and reality', 'Pip, thanks for the info. You, too, matt. I do recall the name on one of the albums from which a cut was playing was Pink Moon.','98.127.110.242'" Data Source = "MUDCAT" The error occurred while processing an element with a general identifier of (CFQUERY), occupying document position (342:1) to (342:50) in the template file D:\!WEBSERVER\MUDCAT\HTDOCS\THREADNEWMESS-SUB.CFM. Date/Time: 01/23/10 11:40:17 Browser: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.1.2) Gecko/20090729 Firefox/3.5.2 GTB6 Remote Address: 98.127.110.242 HTTP Referrer: http://mudcat.org/thread.cfm?threadid=126718&messages=64&page=1&desc=yes |
|
Subject: RE: Tech: Anybody having trouble posting? From: kendall Date: 23 Jan 10 - 07:05 PM I got the same error message |
|
Subject: RE: Tech: Anybody having trouble posting? From: kendall Date: 23 Jan 10 - 07:17 PM It seems to be ok now. |
|
Subject: RE: Tech: Anybody having trouble posting? From: AllisonA(Animaterra) Date: 23 Jan 10 - 07:26 PM For the past few days 4 or 5 posts were there when I checked after posting, but weren't there when I checked back next day. I started to suspect an Evil Post Thief-in-the-Night. Will he-she-it return? Is it lurking still???? Only the Mudcat Shadow knows! |
|
Subject: RE: Tech: Anybody having trouble posting? From: Don Firth Date: 23 Jan 10 - 07:36 PM Yeah, Joe, I've found it to be a fairly chronic problem—within the last few months and seemingly on the increase, in fact. I type up a message, preview it so I can see what it looks like, make sure any HTML codes I've used (italics, underlines, etc.) are correct, check for typos and such and make any corrections (often missing a few even then), and then hit "Submit Message." I almost always pull up the thread again to make sure that the message is actually there, and lo! frequently lately, it's not! If the message is going to be of any length at all (over a sentence or two), I type it out in Microsoft Word, then cut-and-paste it into the message box, then go through the routine above to make sure I haven't missed anything. Fairly often, I have to go back to my Word document and do it again, because the message didn't take. Sometimes even a couple of times on the same message. What's happening? Don Firth |
|
Subject: RE: Tech: Anybody having trouble posting? From: Don Firth Date: 23 Jan 10 - 07:39 PM Aha! My post just above took the first time! Don Firth |
|
Subject: RE: Tech: Anybody having trouble posting? From: Charley Noble Date: 23 Jan 10 - 08:01 PM Lots of problems this morning. Charley Noble |
|
Subject: RE: Tech: Anybody having trouble posting? From: Joe Offer Date: 23 Jan 10 - 09:31 PM I think most of the problems where resolved by Max's surgery this morning. If you are still having problems, post details here. I've sent Max a link to this thread. -Joe- |
|
Subject: RE: Tech: Anybody having trouble posting? From: MGM·Lion Date: 23 Jan 10 - 10:14 PM Another thing is that the cursor will vanish for several seconds to be replaced by 'beach-ball', which will then disappear & letters one has typed in the interim, before noticing this interruption, will appear separately — quite rapidly, but distinctly one-by-one: an odd, and somewhat frustrating, phenomenon, which I hope I have described with sufficient clarity to be understood. — Anyone else noticed this particular wrinkle? - which seems to me to have been going on for 3 or 4 days — but hasn't happened while typing this one... {See my 'Sods Law' thread!} |
|
Subject: RE: Tech: Anybody having trouble posting? From: katlaughing Date: 23 Jan 10 - 11:39 PM Michael, that sounds like more of a software program on your machine or your connection speed...but there are lots of others on here who know much more than I about such things, so I am sure you will get some answers.:-) kit, kat |
|
Subject: RE: Tech: Anybody having trouble posting? From: MGM·Lion Date: 24 Jan 10 - 01:42 AM Thank you Kat. I'd thought of that - except that it is such a rare occurrence & I'd have expected my systems to be more consistent. Still, you may be right at that. Choccie-bar. M |
|
Subject: RE: Tech: Anybody having trouble posting? From: VirginiaTam Date: 24 Jan 10 - 06:04 AM I had trouble several times Saturday and still having difficulty this (Sunday 24 Jan) morning - barring this post (if it takes). |
|
Subject: RE: Tech: Anybody having trouble posting? From: kendall Date: 24 Jan 10 - 06:30 AM I've had a lot of trouble with my e mail server too. Deadly slow and unresponsive. Sun spots? Is the earth's magnetic field ready to switch poles? |
|
Subject: RE: Tech: Anybody having trouble posting? From: Smedley Date: 24 Jan 10 - 06:32 AM Problems yesterday - posts seemingly sent but not appearing; sometimes the ERROR message described above. But today (so far) all OK. |
|
Subject: RE: Tech: Anybody having trouble posting? From: Ian Hendrie Date: 24 Jan 10 - 09:11 AM I had trouble yesterday and had to send the message a second time. Got an error message but can't remember what it was. |
|
Subject: RE: Tech: Anybody having trouble posting? From: SunrayFC Date: 24 Jan 10 - 09:18 AM I only HAVE trouble AFTER I HAVE posted. The only other problem I have is that I don't understand why everyone hides behind a false name. Don't make sense to me. |
|
Subject: RE: Tech: Anybody having trouble posting? From: Max Date: 24 Jan 10 - 10:51 AM We were having a problem, but I appeared to solve it last night. It was a space issue. Well, only because I am not as suave as I should be with databases, and/or we're using 10 year old database software. I've fallen a bit behind on the learning curve. Staying up on the upgrades is less a money issue than a time and knowledge commitment. I'd rather have my nose in a Bronson or Grossman book than a Technical Reference. |
|
Subject: RE: Tech: Anybody having trouble posting? From: maeve Date: 04 Feb 10 - 09:38 AM I'm having trouble posting, sending PMs, etc. Error messages appear. Hitting Refresh seems to help. Jew- I've sent you a copy of one of the Error messages I've been seeing. maeve |
|
Subject: RE: Tech: Anybody having trouble posting? From: olddude Date: 04 Feb 10 - 10:11 AM blew up today |
|
Subject: RE: Tech: Anybody having trouble posting? From: RamblinStu Date: 04 Feb 10 - 10:26 AM Just went down for a while preceeded with this Error Occurred While Processing Request Error Diagnostic Information ODBC Error Code = 37000 (Syntax error or access violation) [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open database requested in login 'Mudcat2007'. Login fails. SQL = "EXEC BlockIPCheck '194.106.220.83','194.106.220','194.106','194'" Data Source = "MUDCAT" The error occurred while processing an element with a general identifier of (CFQUERY), occupying document position (68:1) to (68:51) in the template file d:\!webserver\mudcat\htdocs\Application.cfm. Date/Time: 02/04/10 10:06:12 Browser: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648) Remote Address: 194.106.220.83 HTTP Referrer: http://www.google.co.uk/search?hl=en&source=hp&q=mudcat&meta=&aq=f&oq= Hope this is of use Stuart Pendrill |
|
Subject: RE: Tech: Anybody having trouble posting? From: catspaw49 Date: 04 Feb 10 - 10:35 AM Same message as above but when I go back and try again its okay. Does it almost every click. I have to keep trying and it comes up fine. Something be whupped up....... Spaw |
|
Subject: RE: Tech: Anybody having trouble posting? From: maeve Date: 04 Feb 10 - 10:53 AM Spaw- the Mudcat Wimminz had nothing to do with this. maeve |
|
Subject: RE: Tech: Anybody having trouble posting? From: GUEST,Peter Laban Date: 04 Feb 10 - 10:57 AM Loads of server errors before getting to any page, mostly today but some yesterday as well. Same error message as posted above. |
|
Subject: RE: Tech: Anybody having trouble posting? From: Nancy King Date: 04 Feb 10 - 10:59 AM I've tried twice now to post, and keep getting the error message RamblinStu cited. Guess I'll wait and try again later -- Hmmmm, let's see if THIS one goes through... |
|
Subject: RE: Tech: Anybody having trouble posting? From: Nancy King Date: 04 Feb 10 - 11:03 AM Well, it did, obviously. So I tried again to post to the KYTrad thread, and got the error message again. But this time I hit the "refresh" button, and lo and behold! |
|
Subject: RE: Tech: Anybody having trouble posting? From: GUEST Date: 04 Feb 10 - 11:52 AM down again? |
|
Subject: RE: Tech: Error message From: wysiwyg Date: 04 Feb 10 - 12:35 PM A lot of us are getting it. I'm getting it every other MudClick. ~Susan Here's the whole message: Error Occurred While Processing Request Error Diagnostic Information ODBC Error Code = 37000 (Syntax error or access violation) [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open database requested in login 'Mudcat2007'. Login fails. SQL = "EXEC BlockIPCheck '70.15.67.76','70.15.67','70.15','70'" Data Source = "MUDCAT" The error occurred while processing an element with a general identifier of (CFQUERY), occupying document position (68:1) to (68:51) in the template file d:\!webserver\mudcat\htdocs\Application.cfm. Date/Time: 02/04/10 12:35:32 Browser: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.7) Gecko/20091221 Firefox/3.5.7 (.NET CLR 3.5.30729) Remote Address: 70.15.67.76 HTTP Referrer: http://mudcat.org/thread.cfm?threadid=127068&messages=1 |
|
Subject: RE: Tech: Error message From: kendall Date: 04 Feb 10 - 12:40 PM The sky is falling. |
|
Subject: RE: Tech: Error message From: Alan Day Date: 04 Feb 10 - 12:41 PM START RUNNING !!! |
|
Subject: RE: Tech: Error message From: Rapparee Date: 04 Feb 10 - 12:43 PM "If you run, you'll only die tired." -- US Army sniper. |
|
Subject: RE: Tech: Error message From: the lemonade lady Date: 04 Feb 10 - 12:44 PM PAIN IN THE BUT ISN'T IT??? sal |
|
Subject: RE: Tech: Error message From: open mike Date: 04 Feb 10 - 12:46 PM yep, me too. but since it is only every other click, if i try again i get the page i was trying for... also some messages i composed and thought were posted have disappeared into thin air...or mud... |
|
Subject: RE: Tech: Anybody having trouble posting? From: open mike Date: 04 Feb 10 - 12:52 PM y3s...the error message in this thread and the other "error message" THREAD has come up for me...and the messages i have composed were not there when i hit "back" and had to be re-created. |
|
Subject: RE: Tech: Anybody having trouble posting? From: Jeri Date: 04 Feb 10 - 01:02 PM I texted Max. I hope I don't get in trouble, because that's supposed to be for crashes, but it's headed that way. I get the error message and hit 'reload', at which point it asks me if I want to resend info. I say yes, it does, and my message gets posted. (That's with Firefox) |
|
Subject: RE: Tech: Anybody having trouble posting? From: Jeri Date: 04 Feb 10 - 01:04 PM Like that message FOUR times! |
|
Subject: RE: Tech: Anybody having trouble posting? From: Bill D Date: 04 Feb 10 - 01:07 PM "Posting gets teejous, don't it?" |
|
Subject: RE: Tech: Anybody having trouble posting? From: Jerry Rasmussen Date: 04 Feb 10 - 01:21 PM Yeah, Joe. I've been having a lot of trouble posting, or even opening the Son Of Kitchen Table thread. It opened FINE when it was above the line... :-) Best... Jerry |
|
Subject: RE: Tech: Anybody having trouble posting? From: PoppaGator Date: 04 Feb 10 - 01:21 PM I'm having the same experience. I wonder if THIS will post??? |
|
Subject: RE: Tech: Anybody having trouble posting? From: PoppaGator Date: 04 Feb 10 - 01:34 PM It's very discouraging to write a lengthy comment and then have it fail to post. I'm guessing that this one WON'T post. That's why I kept it short. |
|
Subject: RE: Tech: Anybody having trouble posting? From: open mike Date: 04 Feb 10 - 01:46 PM yes...good to remember to copy text before posting in case multiple tries are required... |
|
Subject: Tech: Error ocurred while.... From: GUEST,Paul Burke, evicted!!! Date: 04 Feb 10 - 01:48 PM Most threads have suddenly gone, like, : Error Occurred While Processing Request I can get sometimes Arthur Fred (sorry, half a thread) if I log out as now. Then it said my cookie was corrupt. Tried logging out and in again, to Noah Vale. Anyone esle getting this? The full message: Error Occurred While Processing Request Error Diagnostic Information ODBC Error Code = 37000 (Syntax error or access violation) [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open database requested in login 'Mudcat2007'. Login fails. SQL = "EXEC BlockIPCheck '86.xxx.xxx.xxx','86.xxx.xxx','86.xxx','86'" Data Source = "MUDCAT" The error occurred while processing an element with a general identifier of (CFQUERY), occupying document position (68:1) to (68:51) in the template file d:\!webserver\mudcat\htdocs\Application.cfm. Date/Time: 02/04/10 13:44:22 Browser: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.9.1.7) Gecko/20091221 Firefox/3.5.7 Remote Address: 86.xxx.xxx.xxx HTTP Referrer: http://www.mudcat.org/thread.cfm?threadid=127067&messages=4 Query String: url=http%3A%2F%2Fmudcat.org%2FLogin.cfm |
|
Subject: RE: Tech: Error ocurred while.... From: Mick Pearce (MCP) Date: 04 Feb 10 - 01:50 PM Had this a few times today. Retrying eventually opened the threads that failed. Mick |
|
Subject: RE: Tech: Anybody having trouble posting? (error msg) From: Carol Date: 04 Feb 10 - 02:02 PM same here |
|
Subject: RE: Tech: Anybody having trouble posting? (error msg) From: GUEST,Paul Burke Cookieless Date: 04 Feb 10 - 02:07 PM Why have you merged my query in one about posting? |
|
Subject: RE: Tech: Anybody having trouble posting? (error m From: Genie Date: 04 Feb 10 - 02:10 PM I'm getting an error message 1/2 to 3/4 of the time when I try to post today (or last night)> This is my 3rd attempt to post this. |
|
Subject: RE: Tech: Anybody having trouble posting? (error msg) From: Jeri Date: 04 Feb 10 - 02:15 PM If you read the thread, Paul, it's the same problem, same error message. By the way, this thread was refreshed today and two new ones started for this latest. |
|
Subject: RE: Tech: Anybody having trouble posting? (error msg) From: Don Firth Date: 04 Feb 10 - 02:38 PM It seemed to heal up there for a bit, but within the last few days, it appears to be back. I have to make darn sure I type a post into Word first, then cut and paste it into the message box. Several times within the past few days, I've hit "Submit Message," then opened the thread again and, lo! my post isn't there! It generally takes on the second attempt. A few nights ago, I tried to access Mudcat fairly late in the evening (maybe ten-ish or so, PST) and got a message telling me that Mudcat had been taken off-line. I presumed that Max or somebody was wielding the wrench and screwdriver. The past couple of nights, I get the same message that RamblinStu posted above at 04 Feb 10 - 10:26 a.m. I don't think the world is coming to an end, but if there's anything in what I've said that helps with the problem, very good. Don Firth |
|
Subject: RE: Tech: Anybody having trouble posting? (error m From: Genie Date: 04 Feb 10 - 03:00 PM Today, not only did I keep getting "error" messages, but one of them was a lie! So I ended up double posting. Argh! |
|
Subject: RE: Tech: Anybody having trouble posting? (error msg) From: Paul Burke Date: 04 Feb 10 - 03:21 PM If you read the thread, Paul, it's the same problem, same error message. By the way, this thread was refreshed today and two new ones started for this latest. But it's NOT when I'm trying to post. It's READING messages. So if you want a general problems thread, change the title to match. |
|
Subject: RE: Tech: Anybody having trouble posting? (error msg) From: Joe Offer Date: 04 Feb 10 - 03:28 PM I've e-mailed a sampling of error messages to Max. -Joe- |
|
Subject: RE: Tech: Anybody having trouble? (error 37000) From: Jeri Date: 04 Feb 10 - 03:43 PM Paul, I can see your point. I think the problem was the same but the symptom looked different. I can see why people wouldn't have found this thread if they were searching for 'error', which is undoubtedly why there were new threads. I changed the thread title, which I hope doesn't piss Joe off(er). |
|
Subject: RE: Tech: Anybody having trouble posting? (error msg) From: JohnInKansas Date: 04 Feb 10 - 03:56 PM I have found the "CFQUERY" error several times when first opening mudcat, and once or twice in the last month when submitting a post. I've more often found the "taken offline by operator," and in a couple of cases when I got the query error a retry confirms the "phone off the hook." Maybe it's just because Max and I (and Don F once) are the only ones awake around 01:00 EST on a fairly regular basis. (22:00 PST would be 01:00 EST.) I've also found more frequent errors than usual at other sites, e.g. with my email server "dropping the connection" just as it starts to download messages; although it's probably unrelated to mudcat. I blame the general network errors on Twitter, since a billion 25 char messages present a much higher probability of "collisions" than a few million intelligent (200 char?) posts. John |
|
Subject: RE: Tech: Anybody having trouble? (error 37000) From: Sawzaw Date: 04 Feb 10 - 03:57 PM I keep getting a long MSQL error message that has IP block checking in there with my IP number. Am I paranoid or is someone trying to block me out? |
|
Subject: RE: Tech: Anybody having trouble? (error 37000) From: Jeri Date: 04 Feb 10 - 04:17 PM That's the message we're getting (if we're getting it). It's the one I've received and the one people have quoted up above. |
|
Subject: RE: Tech: Anybody having trouble? (error 37000) From: Charley Noble Date: 04 Feb 10 - 04:23 PM It's a good day to copy your post to the clipboard before hitting submit. Charley Noble (copying this message to clipboard before hitting submit) |
|
Subject: RE: Tech: Anybody having trouble? (error 37000) From: Don Firth Date: 05 Feb 10 - 12:39 PM Last night at about 10:00 p.m. PST (1:00 a.m. EST), once again I got Error 503 - "taken offline by operator." When I click on the Mudcat bookmark, sits there like it's died for several minutes, then the error message finally appears. Repeated attempts produce the same result. Don Firth |
|
Subject: RE: Tech: Anybody having trouble? (error 37000) From: Paul Burke Date: 05 Feb 10 - 02:44 PM No trouble today- many thanks to those who worked on it. |
|
Subject: RE: Tech: Anybody having trouble? (error 37000) From: Sandra in Sydney Date: 05 Feb 10 - 05:57 PM wot Paul Burke says! sandra |
|
Subject: RE: Tech: Anybody having trouble? (error 37000) From: JohnInKansas Date: 05 Feb 10 - 10:03 PM Don Firth - Yeah, I saw Max working on it last night too. (Unless he's just takin' the phone off the hook to take care of some of the family business he neglects so often for us.) John |
| Share Thread: |