Lyrics & Knowledge Personal Pages Record Shop Auction Links Radio & Media Kids Membership Help
The Mudcat Cafemuddy

Post to this Thread - Sort Descending - Printer Friendly - Home


Assist on Pickguard removal

Related threads:
I've got a sticky guitar neck - help! (17)
Guitar: Why Thompson Belly reducer works? (13)
Ovation Guitar: how to reattach top? (51)
Guitar bridge-pins (34)
machine heads - any opinions? (29)
Removing mildew from a guitar ? (15)
Guitar: How and Where to Store It?? (13)
Guitar Dilemma: Repair or Replace? (26)
Guitar Headstock Design (35)
Tusq v. Bone? (10)
why is a guitar bridge glued down? (35)
Help: Feiten system, anyone? (10)
Do your nuts require surgery? (30)
Guitar repair question (8)
Help: Ebony vs. Brass Bridge Pins (28)
Does a pickguard impede sound of guitar? (36)
Warped Top? I found an answer (19)
Guitar: Removing glossy finish (152)
guitar refurbishment (5) (closed)
Old guitars - pickguard adhesives? (10)
Guitar Truss rod adjustments (49)
Which way should an extension nut face? (9)
Guitar polish (40)
Filing a fret (15)
Tried Brass Bridge Pins? (51)
Buzz Feiten Tuning System (40)
Guitar cleaning stuff! (8)
Re-capture of serial number (guitar) (11)
Strings a-buzzin'! Please Help! (13)
Tech: Restoring a Patenotte (2)
Guitar re-furbishment (10)
Micarta (5)
Help needed please - guitar bridge glue (20)
Care and feeding of a guitar (24)
Gibson 18 Repair (6)
Guitar saddles (26)
Help needed - loss of gloss!! (25)
Best glue for plastic binding repairs? (3)
Re-fretting guitars (6)
Removing wax polish from guitars (4)
guitar nut/neck size (22)
string buzz on a dobro (5)
Buffing out a matte guitar (10)
Tech: Instrument Cases for Flying (30)
Stripped truss rod nut (9)
Guitar truss rods (14)
Resonator Bridge Replacement (6)
Heel pin placement-Martin (12)
Scalloped/Straight Bracing-Differences? (19)


Greycap 17 May 03 - 04:43 AM
mooman 17 May 03 - 05:46 AM
EBarnacle1 17 May 03 - 09:26 AM
GUEST 17 May 03 - 10:04 AM
Greycap 18 May 03 - 02:58 AM
Mark Cohen 18 May 03 - 06:58 AM
Share Thread
more
Lyrics & Knowledge Search [Advanced]
DT  Forum
Sort (Forum) by:relevance date
DT Lyrics:





Subject: Assist on Pickguard removal
From: Greycap
Date: 17 May 03 - 04:43 AM

My 1965 Martin D-28 haa parts of the pickguard lifting at the edges, I have a replacement pickguard from CFM and wish to remove the existing old one.
Have any 'Catters ever replaced a Martin pickguard, and if so, how? What pitfalls are there for the unwary? All experienced help/ advice gratefully received.


Post - Top - Home - Printer Friendly - Translate

Subject: RE: Assist on Pickguard removal
From: mooman
Date: 17 May 03 - 05:46 AM

I have removed and replaced innumerable pickguards as a full-time repairman in an earlier life and the technique I always use is to use a thin and fairly flexible kitchen or palette life (which can be warmed a little but not too hot or it will damage the finish). This can be inserted carefully under the loose edge and, with gentle movements, used to gradually work the guard loose. Take your time and use gentle movements to avoid any large wood splinters being removed from the top. If this happens, it may be possible to carefully glue them back in before replacement.

Before placing the replacement, work over the area gently with some very fine abrasive paper (180+) to provide a "key" and remove any previous glue residues, again taking care to remain within the boundaries of the pickguard and not touching the surrounding finish.

If the pickguard is not already supplied with an adhesive side, always use animal glue. Never use cyanacrylate or similar in case you ever need to replace the guard again. Usually gentle pressure applied evenly across the whole of the new pickguard is sufficient for a secure placement.

I hope this helps a little.

Good luck and best regards,

moo


Post - Top - Home - Printer Friendly - Translate

Subject: RE: Assist on Pickguard removal
From: EBarnacle1
Date: 17 May 03 - 09:26 AM

If you have access to it, a very fine stainless wire [single strand, not twisted or braided] pulled gently in from the edges will apply cleavage over a broader area than will a knife.


Post - Top - Home - Printer Friendly - Translate

Subject: RE: Assist on Pickguard removal
From: GUEST
Date: 17 May 03 - 10:04 AM

Just go here and read.


Post - Top - Home - Printer Friendly - Translate

Subject: RE: Assist on Pickguard removal
From: Greycap
Date: 18 May 03 - 02:58 AM

Folks,All of you - thanks a million!!
Roger


Post - Top - Home - Printer Friendly - Translate

Subject: RE: Assist on Pickguard removal
From: Mark Cohen
Date: 18 May 03 - 06:58 AM

That frets.com site is a gem!

Aloha,
Mark


Post - Top - Home - Printer Friendly - Translate
  Share Thread:
More...

Reply to Thread
Subject:  Help
From:
Preview   Automatic Linebreaks   Make a link ("blue clicky")


Mudcat time: 20 October 11:18 AM EDT

[ Home ]

All original material is copyright © 1998 by the Mudcat Café Music Foundation, Inc. All photos, music, images, etc. are copyright © by their rightful owners. Every effort is taken to attribute appropriate copyright to images, content, music, etc. We are not a copyright resource.