|
10 Nov 10 - 02:59 PM (#3028546) Subject: BS: Any other Mudcat woodturners out there From: Big Mick I know Bill D is a wonderful woodturner. I am a novice but find that this is just one more way to express my creativity. I would think that other 'Catters might also be so inclined. Especially in the UK, as well as Australia, where there are so many Masters. |
|
10 Nov 10 - 03:36 PM (#3028599) Subject: RE: BS: Any other Mudcat woodturners out there From: Rapparee Well, I'm fiddling around the edges. I'll be doing some woodcarving and such this Winter, but it's hard to do woodturning without a lathe. (I do have two routers, though.) Brings to mind those old folk songs: Will ye go, lathey, go? Bonnie Lathy, Hiland Lathy. Darcy Farrow (...he bought her rings and lathey things...) The Wind That Shakes The Corn (...and lathe my true love's clay-cold corpse...) Gypsy Lathy I'd better stop for the sake of my continued health.... |
|
10 Nov 10 - 04:46 PM (#3028665) Subject: RE: BS: Any other Mudcat woodturners out there From: Georgiansilver Beat the drum slowly, And lathe the sod over me. I'm just a young cowboy, Who knows he's done wrong. |
|
10 Nov 10 - 04:55 PM (#3028669) Subject: RE: BS: Any other Mudcat woodturners out there From: WalkaboutsVerse I only had a brief go at woodturning during high-school in Australia, but I enjoyed it much more than metalturning. |
|
10 Nov 10 - 05:13 PM (#3028694) Subject: RE: BS: Any other Mudcat woodturners out there From: John MacKenzie I am making picnic benches, to eke out my pension. Here's one I made earlier. |
|
10 Nov 10 - 05:23 PM (#3028703) Subject: RE: BS: Any other Mudcat woodturners out there From: Georgiansilver Sturdy piece of work that John Mac..... an artisan no less!! |
|
10 Nov 10 - 06:37 PM (#3028778) Subject: RE: BS: Any other Mudcat woodturners out there From: John MacKenzie 6"x 2" Douglas Fir, coated with Danish oil. Made to take the weight of normal people :) |
|
10 Nov 10 - 06:44 PM (#3028793) Subject: RE: BS: Any other Mudcat woodturners out there From: Arthur_itus This man is an amazing Woodturner and I hope I don't embarress him for posting, but it needs to be done. http://www.angelfire.com/folk/gainsboroughfolk/mtwgal.html Take a bow Mr Sooz |
|
10 Nov 10 - 06:54 PM (#3028802) Subject: RE: BS: Any other Mudcat woodturners out there From: Bill D Well..*I* like Mike's work...because he makes a lot of stuff similar to what I do! Good taste! *grin*...and really nice work. NOW I see why the answer in the other thread: didn't see this thread before. Mudcat woodturner |
|
10 Nov 10 - 06:56 PM (#3028804) Subject: RE: BS: Any other Mudcat woodturners out there From: Arthur_itus Blimey you and Mike should live together. Hmmm maybe not as Mrs Sooz may not like that. :-) Nice stuff Bill |
|
10 Nov 10 - 08:40 PM (#3028883) Subject: RE: BS: Any other Mudcat woodturners out there From: open mike i just found someone to re-produce a spinning wheel bobbin for my wheel I was looking for a wood turner...and did not think to post a request on here...finally found someone in Wisconsin who was willing to make several bobbins if i would send the original one. |
|
11 Nov 10 - 02:41 AM (#3029020) Subject: RE: BS: Any other Mudcat woodturners out there From: mandotim I do a bit now and then. Mostly 'poppadum' bowls; using unseasoned, spalted wood, turnig a thin, flattish bowl, then weight the centre for about 6 months and let the edges 'move' as the wood dries. Results are variable, but the best ones are beautiful flat bowls with wavy edges. I usually wax finish them. |
|
11 Nov 10 - 03:02 AM (#3029028) Subject: RE: BS: Any other Mudcat woodturners out there From: Georgiansilver I have a couple of pieces turned by the fantabulous Mr Sooz.... spalted beech makes for beautiful items... and he is one clever guy!!! |
|
11 Nov 10 - 03:48 AM (#3029053) Subject: RE: BS: Any other Mudcat woodturners out there From: Wolfhound person Do some in the course of making musical instruments - mostly in blackwood. Paws |
|
11 Nov 10 - 04:57 AM (#3029102) Subject: RE: BS: Any other Mudcat woodturners out there From: John MacKenzie I would love to learn to turn bowls etc. Where do I learn though? I would need to know how to do it, and what would suit my needs, before I went out and spent money on a lathe. I have been caught out before on buying things like this, I bought a table saw, when what I really needed was a compound mitre saw. I won't do that again, too expensive a mistake. |
|
11 Nov 10 - 10:38 AM (#3029316) Subject: RE: BS: Any other Mudcat woodturners out there From: Bill D John...there's far more turners per capita in the UK than in the US. Many give demos. You be surprised how easy it is to start and do 'easy' stuff. There are lathes of all sizes...(I started on a small $89 thing that sat on a table!) One 'ought' to have a bandsaw to make use of 'found wood', but http://www.craft-supplies.co.uk/> will sell you wood already trimmed...and everything else you'd even need. |
|
11 Nov 10 - 10:51 AM (#3029334) Subject: RE: BS: Any other Mudcat woodturners out there From: Stilly River Sage John, that is a wonderfully solid picnic table you built! Too bad you're so far away. I need one here. :) When I looked at Mr Sooz's page I wondered if I had landed on Bill D's page. They are very similar, both sets of work are beautiful. SRS |
|
12 Nov 10 - 12:38 AM (#3030027) Subject: RE: BS: Any other Mudcat woodturners out there From: LadyJean Does anyone want a treetrunk? I had a tree taken down in my backyard. The fellow who did it took away all the branches but left the trunk. If you need firewood or wood to work, it's there, all you need to do is come and pick it up. Agreed it's a bit of a trip from Australia, and they probably wouldn't let it on the plane. But if y ou live in Western Pennsylvain, or know someone who does, let me know, I'll tell you where to pick it up. |
|
12 Nov 10 - 12:49 AM (#3030031) Subject: RE: BS: Any other Mudcat woodturners out there From: Big Mick LadyJean, turners would want to know what type of tree it was. This is a very nice offer. All the best, Mick |